This hot water-capable unit is suitable for inlet temperatures of up to 85°C. Standard equipment includes pressure adjustment with water volume regulation on the device, a pressure gauge, and an overpressure valve. It also comes with a 10-meter high-pressure hose and a dual lance set as part of the standard package. This unit delivers top-notch performance and versatility for your high-pressure cleaning needs.
If the unit is not required, the unit switches to standby mode after 20 seconds and starts up again immediately after the gun is actuated.
Slow-running three-piston pump with ceramic piston, independent of direction of rotation, stainless steel valves, water-bearing parts corrosion-resistant, brass valve body.
After adjustable time in stand-by mode, the complete switch-off takes place automatically.
Shutdown in case of leakage outside operation to prevent damage. In the event of repeated unintentional switching on from stand-by mode (pressure loss, e.g. due to leakage), the machine switches off automatically.
Here are some examples from our wide range of products.
The TOP device for highest demands. The Red Power 22/220hot.3 has the maximum power. The slow-running crankshaft pump is the powerful heart of the hot water high-pressure cleaner.
The enormous water capacity of 1,500 litres per hour distinguishes the P 25/150.
High flushing capacity and 180 bar pressure are the hallmarks of the P 21/150.
The Red Power 10/160 offers the maximum power possible with 230V luminous flux. A whopping 3,000 watts are available for powerful tasks.
© LEMA Mayrhofer GmbH
