WM14/180
Standard equipment: pressure adjustment with water volume regulation on the unit, pressure gauge, overpressure valve, standard with 10m HP hose and double lance set
Standard equipment: pressure adjustment with water volume regulation on the unit, pressure gauge, overpressure valve, standard with 10m HP hose and double lance set
If the unit is not required, the unit switches to standby mode after 20 seconds and starts up again immediately after the gun is actuated.
Slow-running three-piston pump with ceramic piston, independent of direction of rotation, stainless steel valves, water-bearing parts corrosion-resistant, brass valve body.
After adjustable time in stand-by mode, the complete switch-off takes place automatically.
Shutdown in case of leakage outside operation to prevent damage. In the event of repeated unintentional switching on from stand-by mode (pressure loss, e.g. due to leakage), the machine switches off automatically.
Here are some examples from our wide range of products.
Hot water unit suitable for flow temperatures up to 85°C. Standard equipment: pressure adjustment with water volume regulation on the unit, pressure gauge, pressure relief valve, standard with 10m HP hose and double lance set.
Independent of electricity, a wide range of tasks can be carried out in places without a power supply. The weight of this device is still very moderate at 47kg.
High flushing capacity and 180 bar pressure are the hallmarks of the P 21/150.
© LEMA Mayrhofer GmbH
